Description
Made in the USA the Dew-Not dew remover is a thick film heater made for operation at 12 volts.
Sixty-six percent of the Dew-Not dew remover surface area is heat emitting – meaning more even heat distribution and no localized hot spots.
Covered by over 30 US and international patents, and with more than 20 years of improvements and enhancements, the Dew-Not dew remover is reliable and efficient.
Each Dew-Not dew remover strip comes with a standard six foot cord and phono-plug connector.
A suitable 12 volt DC supply is required (either via mains transformer or battery) and a supply connector cable or controller.
Using 50 – 75% of the power of other dew heaters it’s now possible, in many situations, to dispense with the additional cost of a controller and to use only an inexpensive fused supply cable.
Technical Specifications
| Scope / Eyepiece / Finder / Lens ……… | Length / Power consumption |
|---|---|
| .965″ eyepieces | 4.5″ (11.4cm) 2.1 watts 0.18 amp |
| 1.25″ eyepieces | 6.5″ (16.5cm) 3.1 watts 0.25 amp |
| 2″ eyepieces & 50 / 60mm finders | 9.0″ (22.9cm) 4.2 watts 0.35 amp |
| 3″ scopes | 13.0″ (33.0cm) 6.0 watts 0.50 amp |
| 4″ scopes | 15.5″ (39.4cm) 7.3 watts 0.61 amp |
| 5″ scopes | 16.7″ (42.5cm) 7.9 watts 0.66 amp |
| 6″ scopes | 20.5″ (52.1cm) 9.6 watts 0.80 amp |
| 7″ scopes | 25″ (63.5cm) 11.8 watts 0.98 amp |
| 8″ scopes | 30″ (76.2cm) 14.0 watts 1.18 amps |
| 9.25″ scopes | 33″ (83.8cm) 15.5 watts 1.30 amps |
| 10″ scopes | 38″ (96.5cm) 17.8 watts 1.49 amps |
| 11″ scopes | 40″ (101.6cm) 18.8 watts 1.57 amps |
| 12″ scopes | 43″ (109.2cm) 20.2 watts 1.68 amps |
| 14″ scopes | 49″ (124.5cm) 23.0 watts 1.92 amps |
| 16″ scopes | 55″ (139.7cm) 25.8 watts 2.15 amps |
| Binoviewers | 2 x (6″ (15.2cm) 5.6 watts 0.47 amps) |
For camera lenses and small APOs we now stock the Dew Not CAM10 heater strip









Reviews
There are no reviews yet!