QHY adapter 020056 with 4 Through Holes, designed for use with 4/3 or smaller sensors, this adapter changes the front of the camera to a Male T thread for attaching to a filter wheel, spacers or other accessories.
The Baader Optical Wonder Cleaning Kit completely removes finger prints and their acid residues, and forms a protective layer against the bacteria and fungi which damage glass and coatings.
Optical Wonder fluid dries completely without leaving any residue or marks.
We are unable to Post this item outside of the UK.
The ZWO SeeStar S50 All-in-One Smart APO Refractor combines a Telescope, Carbon Fibre tripod, Electric Focuser, Colour Camera, ASIair, Go-To Mount, and Filters into a single innovative device
It has now been superceded by the fantastic new ZWO Seestar S50 Pro
The Astronomik OIII CCD Filter 6nm dramatically increases the contrast between hydrogen fog and the sky background.
Due to the combination of low half-width and high transmission of almost 100% in the area of ​​the OIII line, the filter delivers a maximum signal in the desired wavelength, but blocks all other radiation and thus ensures an extremely dark sky background.
Select options
This product has multiple variants. The options may be chosen on the product page
25mm PoleMaster Lens for QHY, ZWO and other Cameras with CS mount, specially chosen for it’s high image quality and used in the PoleMaster Polar Alignment accessory.
Turns any CS mount camera into a high sensitivity finder for smaller fainter objects and makes it useful for pointing and Polar Alignment.
The Revolution Imager WiFi Emitter allows you to broadcast video from the Revolution Imager to your compatible Android or iOS device! This gives you an extra degree of freedom when you’re outside and sharing the wonders of the universe. The WiFi emitter is simple to connect and can run from the same 12v DC power source as other components in the System.
A Genuine SkyWatcher Replacement HEQ5 Pro Motherboard for maintenance purposes when damage occurs. This is an MC020 Rev D mainboard, which is an upgraded replacement that introduces ARM-based processors rather than the older PIC chips. Be aware that the upgraded boards operate optimally on a tighter, regulated 12V +/- 0.5Vinput i.e. 11.5v to 12.5 volts
This 2m silicone dew strip supply cable connects a single dew heater strip to a 12 volt cigar lighter socket, when you don’t want or need to use a controller. Suitable dew strips for that situation are in the Dew Not range.
This Astronomik SII CCD Filter 6nm is suitable for photographing SII regions from artificially polluted areas as well as places with dark skies. The contrasts between objects that glow in the light of the sulfur line at 672nm and the sky background are greatly enhanced.
The 6nm SII-CCD filter dramatically increases the contrast between hydrogen fog and the sky background.
Select options
This product has multiple variants. The options may be chosen on the product page
The QHY 020076/77 Adapter Set is an M54 Male to M54 Female Adapter with 2″ Filter Holder which allows a filter to be added to the imaging train of M54 cameras like the QHY367C,QHY168C, QHY247C and QHY128C
PoleMaster Adapter for UNC thread
This adapter can be used to mount the PoleMaster on any 1/4″- 20 UNC (universal) thread, handy for DIY installations
Visual & Photographic AstroSolar ND5 Safety Film, high density coatings on both sides of a specially manufactured foil reduce the intensity of sunlight by up to 99.999%. The sun’s image is extremely contrasty and white,
Astronomik MC-Clear Glass Filter, a high Optical Quality multi coated filter, when full spectrum transmission is required. Scratch resistant and par-focal with other Astronomik filters. Price includes delivery.
Select options
This product has multiple variants. The options may be chosen on the product page
QHY5III585C Colour camera (YouTube Review) is one of a new generation of QHY5III V2 series planetary / guide cameras and an enhanced version of its predecessor QHY5III485C. It has high sensitivity in the near infrared, similar to that of QHY5III462C with improved dynamic range. The sensor in this camera is also used in the spectacular SeeStar S30 Pro.
The QHY5III200M is a next generation QHY5III V2 series planetary guide camera using a CMOS sensor with high near-infrared sensitivity, similar to the QHY5III462C. The PC interface is USB 3.2 Gen1 Type C and the camera is supplied with an IR850nm filter.