Revolution Imager Archives - Modern Astronomy

FunStar for C11

Bernard Karpinski — Mon, 08 Dec 2025 12:07:17 +0000

FunStar for C11 package, comprises FunStar adapter (95mm high in total with internal 2″ filter thread and external SCT thread), power extension cable, 2x cable clips and velvet bag.

Takes 1.25″ OD format cameras and needs a Fastar compatible OTA.

Big brother to the Funstar for C8

Unlock the SPEED of your Celestron SCT telescope with the Funstar Adapter for Fastar Compatible 11″ Celestron SCTs. The FunStar is an adapter for Fastar compatible Celestron SCT telescopes that allows you to place the Revolution Imager in the secondary mirror position of your SCT telescope allowing you to use the telescope at an amazing focal ratio of f/2, this gives you the widest possible views and the lowest exposure times!

Installation is quick and easy, simply unscrew the secondary mirror from your Celestron SCT telescope, install the FunStar in its place, insert your Revolution Imager and you’re ready to experience those wide summer nebulas, large galaxy groups, huge open clusters and even the full disk of the moon!

The FunStar provides a standard 1.25″ opening and SCT threads for a huge variety of adapter combinations. Also, the 11″ adapter is threaded on the inside for 2″ filters.

Please note: The FunStar does not provide any correction, so some aberrations will be present. However, the small chip-size in the Revolution Imager and similar small sensor makes these aberrations minimal. NB please do not over tighten either the FunStar or your secondary when installing, just a little more than finger tight is enough!

The post FunStar for C11 appeared first on Modern Astronomy.

Revolution mini DVR (less SDcard)

Bernard Karpinski — Tue, 17 Dec 2024 18:38:05 +0000

Revolution mini DVR – See it and Save it!
The Revolution Imager LCD Digital Video Recorder (DVR) allows you see what you’ve been missing and also save it for later viewing or further processing, without the need for troublesome computers! The Revolution mini DVR – See it and Save it! includes a 2.7″ LCD and the ability to save videos and photos on the supplied 16 gigabyte SD card. The Revolution DVR conveniently runs off of an included Lithium-Ion battery and includes the charger.

The kit also includes a remote control that can be used to save images hands-free from the device and a video-splitter so you can use this at the same time as the 7″ monitor included with your Revolution Imager.

If you do plan on “stacking” images using AVI there is a very useful tool to clean up the video codec, found here: https://sites.google.com/site/astropipp/

And now experience the ultimate in portability by adding our hands-free DVR mounting solution here.

The post Revolution mini DVR (less SDcard) appeared first on Modern Astronomy.

Funstar Adapter for Fastar Compatible 8″ Celestron SCTs

Bernard Karpinski — Thu, 27 Aug 2020 19:01:34 +0000

Unlock the SPEED of your Celestron SCT telescope with the Funstar Adapter for Fastar Compatible 8″ Celestron SCTs. The FunStar is an adapter for Fastar compatible Celestron SCT telescopes that allows you to place the Revolution Imager in the secondary mirror position of your SCT telescope allowing you to use the telescope at an amazing focal ratio of f/2, this gives you the widest possible views and the lowest exposure times!

The FunStar provides a standard 1.25″ opening and SCT threads for a huge variety of adapter combinations. Also, the 8″, 9.25″ and 11″ adapters will be threaded on the inside for 2″ filters.

Please note: The FunStar does not provide any correction, so some aberrations will be present. However, the small chip-size in the Revolution Imager makes these aberrations minimal. Also, do not over tighten either the FunStar or your secondary when installing, just a little more than finger tight is enough!

The post Funstar Adapter for Fastar Compatible 8″ Celestron SCTs appeared first on Modern Astronomy.

Revolution Imager All Sky Lens

Bernard Karpinski — Sat, 02 Nov 2019 14:10:04 +0000

The Revolution Imager All Sky lens allows you to image wide areas of the sky (150 degrees) using the powerful sensitivity of the Revolution Imager. Perfect for capturing images of the milky way, constellations, meteors and satellites! When combined with a USB Capture Device and powerful software like SharpCap you can easily setup a time-lapse for meteors and satellites or see the constellations move across the night sky! Software such as HandyAvi can be used for motion detection, surveillance and animation.

Specifications:

Focal Length: 2.1mm
Focal Ratio: f/1.2
Field-of-View (with Revolution Imager R2) =150 degrees

Field of view is less than 180 degrees with this lens, as few of us enjoy a complete view of the sky. Moreover light pollution and haze are often visible near the horizon. However if you’d like a lens that gives a full 180 degree view (in fish eye format) with the Revolution Imager R2 and other 1/3″ format cameras please choose the All Sky Lens for QHY5L-II Cameras.

The post Revolution Imager All Sky Lens appeared first on Modern Astronomy.

Revolution Imager 0.5x Reducer

Bernard Karpinski — Mon, 10 Dec 2018 13:09:17 +0000

Revolution Imager 0.5x Reducer, increases field of view and makes low surface brightness and extended objects much easier to find and view.
Works on any C/CS camera with a 1.25″ threaded nosepiece and accepts 1.25″ filters.
Exact reduction ratio varies with distance to sensor and can usually be optimised for the camera / scope combination in use – ask if unsure.

The post Revolution Imager 0.5x Reducer appeared first on Modern Astronomy.

Revolution mini DVR

Bernard Karpinski — Fri, 15 Jun 2018 11:38:34 +0000

If you do plan on “stacking” images using AVI there is a very useful tool to clean up the video codec, found here: https://sites.google.com/site/astropipp/

And now experience the ultimate in portability by adding our hands-free DVR mounting solution here.

The post Revolution mini DVR appeared first on Modern Astronomy.

Ball head Mount for LCD Monitor

Bernard Karpinski — Tue, 05 Jun 2018 20:36:04 +0000

This ball head mount for LCD monitor allows you to mount the Revolution Imager 7″ LCD onto an existing camera tripod or camera piggy-back and gives you the freedom to move and adjust the monitor for the best viewing experience.

The post Ball head Mount for LCD Monitor appeared first on Modern Astronomy.

Revolution Imager RED shield for 7 inch monitor

Bernard Karpinski — Tue, 05 Jun 2018 20:28:20 +0000

With the clip-on Revolution Imager RED shield for 7 inch monitor you can safely use your Revolution Imager at a dark site or star party while protecting your night vision and the night vision of those around you!

Hand made by Revolution Imager, using only the finest Class 0 acrylic and felt, in the USA this shield also prevents glare on the monitor from outside sources and simply clips on to the top of the monitor.

The post Revolution Imager RED shield for 7 inch monitor appeared first on Modern Astronomy.

Hands Free Revolution DVR Mount

Bernard Karpinski — Tue, 05 Jun 2018 20:14:05 +0000

The Hands Free Revolution DVR mount is a versatile mounting solution for the Revolution DVR. It consists of a clamp that connects to the DVR to hold it safely and securely and a flexible ball-head to allow you to position the DVR at a comfortable viewing angle.

There is also a 1/4-20 coupling bolt that lets you attach the DVR directly to the bottom of the Revolution Imager camera for the ultimate in portability!

(DVR, Revolution Imager, and cables not included)

The post Hands Free Revolution DVR Mount appeared first on Modern Astronomy.

Revolution Imager Reducer and Two Part Adapter

Bernard Karpinski — Thu, 31 May 2018 11:20:33 +0000

Revolution Imager Reducer and Two Part Adapter, designed to allow optimal field of view and image illumination with telescopes of wide ranging F ratios. A useful accessory pack to the Revolution Imager R2 “Camera and Controller option” as well as other AstroVideo / EEA cameras.

The post Revolution Imager Reducer and Two Part Adapter appeared first on Modern Astronomy.